My splendid blog 9975

There is a big difference between an HVAC system that needs a repair and one that is simply running out of road. Homeowners feel that difference before they can always name it. The house takes longer to cool. One bedroom never seems comfortable. The system kicks on, shuts off, then starts again. The utility bill creeps upward even though your habits have not changed much. Then one of the hot spells hits, the kind that puts real strain on equipment, and suddenly you are wondering whether you are dealing with a rough season or the end of your system’s useful life. That question matters even more in places with hard summer demand. In Pasadena, for example, summer heat is not theoretical. July averages a high of 89.1°F and August averages 91.3°F. Just as important, those months bring a lot of very hot days, with July averaging 15.4 days at or above 90°F and August averaging 19.4 such days. When a cooling system has to work through that kind of weather, small weaknesses stop being small. Marginal performance gets exposed quickly. A lot of people wait for a complete breakdown before they think seriously about replacement. Sometimes that is understandable. HVAC equipment is expensive, and a repair often feels like the more reasonable move in the moment. But a system usually gives warning signs before it quits altogether. Knowing how to read those signs can save money, reduce stress, and help you avoid scrambling for emergency HVAC services in the middle of a heat wave. The first question is not “Can it be repaired?” Most systems can be repaired, at least once more. That is not always the same as saying they should be. I have seen homeowners put good money into a unit because the immediate problem looked simple. A capacitor fails, a blower issue pops up, or the system is low on performance and someone offers a fix that gets it running again. For a while, that can be the right call. But there comes a point when every repair is really buying time rather than restoring confidence. That distinction is important. If you are paying for repairs and still living with uneven temperatures, high bills, or a system that sounds strained every afternoon, the repair is not solving the larger problem. It is just keeping an aging setup on life support. ENERGY STAR points to several practical replacement signals: equipment older than 10 years, frequent repairs, rising energy bills, and rooms that are too hot or too cold. None of those signs alone is a perfect trigger. Together, they paint a pretty clear picture. Age matters, but it is not the whole story Homeowners often ask for a hard rule, something like, “If my system is 12 years old, should I replace it?” The honest answer is that age is a useful clue, not a verdict. A unit that is older than 10 years deserves a closer look, especially if other problems are showing up. That does not mean every system past that age is finished. Some older systems keep plugging along. But once equipment moves into that range, replacement should become part of the conversation, not a distant idea for another year. What matters just as much is how the system has lived. Equipment that has had to battle long, hot summers will often show wear sooner than equipment under lighter demand. In an area where there are many days at or above 90°F, air conditioning is not getting occasional use. It is being asked to perform steadily, often during the hottest part of the day when every house on the block wants cooling at once. Aging equipment under that kind of load becomes less forgiving. Small installation flaws, duct issues, and sizing mistakes that might have gone unnoticed in milder conditions tend to become obvious. The signs homeowners notice first The most reliable signs are often not dramatic. They are patterns. You start adjusting the thermostat more often, trying to coax the same comfort you used to get automatically. The home no longer feels evenly cooled. You notice the system running longer but delivering less. Or you notice the opposite, short bursts of operation that leave the air cool for a moment without ever really settling the house. These are the signs I would pay attention to: The system is more than 10 years old and performance has started slipping. Repairs are becoming frequent rather than occasional. Energy bills are rising without a clear change in usage. Some rooms stay too hot or too cold. The system seems to start and stop too often. That last point deserves more attention than it usually gets. Short cycling, where equipment turns on and off too frequently, is more than an annoyance. ENERGY STAR warns that oversized systems can shorten equipment life because of short cycling. It is hard on components, often leads to uneven comfort, and can leave homeowners confused because the unit technically still runs. A system can be operating and still be failing at its actual job. Rising bills usually have a story behind them Higher utility costs are one of the clearest reasons to revisit an older HVAC system. If your bill climbs during peak summer weather, that is not surprising by itself. But if the increase continues even though your habits have stayed fairly consistent, the system may be losing efficiency. There are several possible causes. Age is one. Installation quality is another. The Department of Energy notes that oversized systems, improper charging, and leaky ducts can reduce efficiency, create comfort problems, and shorten equipment life. That means the equipment itself may not be the only issue. A system that was never properly matched to the house or installed with enough care can underperform for years. This is where homeowners sometimes get trapped. They blame the age of the equipment when the original sizing or installation was poor, or they assume a new unit alone will solve everything when the ducts are leaking and the airflow problems remain. Both mistakes cost money. The takeaway is simple. Rising bills are a signal to investigate the whole system, not just the box outside or the unit in the attic or closet. Uneven temperatures are not something to shrug off People get used to discomfort in stages. First, one room is always warmer in late afternoon. Then another room stays stuffy at night. Soon the family has workarounds. Someone keeps a fan running, someone closes blinds all day, someone avoids using a certain room until evening. That is not normal HVAC performance. It is coping. ENERGY STAR lists rooms that are too hot or too cold as one of the signs that replacement may be the right move. Sometimes that problem can be improved without full replacement, especially if the root cause is duct sealing or another system issue. But if the equipment is already older, repair history is stacking up, and comfort is getting worse, uneven temperatures are often part of a broader decline. The practical question is whether your current system can still maintain comfort through real weather, not just mild days. A unit that barely keeps up on a 78-degree afternoon tells you very little. A unit facing repeated 90-plus days tells the truth. Why breakdowns tend to happen at the worst time HVAC systems almost never pick a convenient day to fail. They break when demand is highest, because that is when weak parts are under the most stress. That HVAC installation services is why people who postpone a replacement often wind up making the decision in a rush. Once the house is hot and the system has stopped, you are no longer comparing options calmly. You are searching for emergency HVAC help, working around appointment backlogs, and trying to make a major purchase while uncomfortable and pressed for time. Emergency HVAC service has its place. When a system quits during a dangerous heat spell, getting immediate help matters. But relying on emergency HVAC services as your replacement strategy is usually expensive and stressful. You may have fewer scheduling choices, less time to compare equipment, and less room to think through whether a different type of system would serve the home better. A planned replacement almost always gives better odds of a better result. The replacement conversation has changed in recent years For a long time, many homeowners thought in very simple terms. If the air conditioner was old, they replaced it with another air conditioner. If the furnace had issues too, that became a separate decision. Now there is another option that deserves serious consideration: the heat pump. The Department of Energy says modern air-source heat pumps can cool homes efficiently in summer and are an energy-efficient alternative to traditional air conditioners and furnaces. ENERGY STAR also notes that a central air conditioner can often be replaced with a heat pump for a modest additional cost, and that doing so can allow a homeowner to eliminate or downsize a furnace. That does not mean a heat pump is automatically the right answer for every house. It does mean homeowners should ask about it rather than assuming a like-for-like AC replacement is the only path. If you are already spending the money for major HVAC work, it makes sense to understand whether a different system type could improve efficiency and simplify the setup. This is especially true when both cooling and heating equipment are aging together. Replacing one major component without considering the whole picture can lock you into another round of decisions sooner than you would like. Installation quality can make a great system perform badly A surprising number of homeowners focus almost entirely on brand or advertised efficiency. Those things matter, but not nearly as much as people assume if the system is poorly sized or poorly installed. Both DOE and ENERGY STAR stress that installation quality is critical. Oversized equipment can short cycle. Improper refrigerant charging can increase energy use and raise the risk of system failure. Leaky ducts can waste conditioned air and undermine comfort. Correctly sized and matched equipment, based on load calculations and paired with a well-sealed duct system, is central to good performance. This point is worth lingering on because it explains why some new systems disappoint people. They expected quieter operation, lower bills, and steadier temperatures. Instead, they got another unit that blasts on, shuts off quickly, and never quite settles the house. The problem was not necessarily that the equipment was bad. It may have been the wrong size, installed without enough attention to the actual load of the home, or connected to ductwork that was compromising performance from day one. A homeowner shopping for replacement should care as much about the contractor’s process as the equipment proposal. If the sizing conversation feels rushed, that is a warning sign. If no one is talking about duct condition, that is another. When repair still makes sense Not every troublesome system needs immediate replacement. There are cases where a repair is still the reasonable decision. If the equipment is not yet in the older range, the issue is isolated, and the system has otherwise been cooling and heating the home well, a repair can be a smart move. The same is true if a comfort problem is clearly tied to something that is not a core equipment failure. The key is to look for pattern versus event. An event is a single problem. A pattern is repeated service calls, persistent comfort complaints, or ongoing operating costs that are moving in the wrong direction. Patterns are what push the decision toward replacement. This is one of those judgment calls that cannot be reduced to one magic formula. Homeowners often want HVAC services certainty, but what you are really weighing is confidence. Does this repair restore trust in the system for the next few years, or does it merely postpone an outcome that is getting more obvious? How to think about replacement before you are forced into it A calm replacement process looks very different from an emergency one. You have time to compare options, ask about sizing, think through your budget, and decide whether a heat pump belongs in the conversation. A rushed process usually starts with a failure on a hot day. The house heats up fast, everyone is uncomfortable, and the main priority becomes getting cold air back as quickly as possible. That is how homeowners end up saying yes to whatever is available, rather than what is best. If your system is showing several replacement signs, moving early has real advantages: You can schedule work before a full breakdown creates urgency. You can compare whether a standard AC replacement or a heat pump makes more sense. You can ask about load calculations, equipment matching, and duct sealing. You reduce the odds of needing emergency HVAC services during extreme weather. You give yourself a better chance at long-term savings from proper installation. Those long-term savings are not trivial. ENERGY STAR says a properly installed high-efficiency system can save up to 20% on heating and cooling costs. Notice the wording there. Properly installed matters. High efficiency on paper is only part of the story. Real savings depend on the whole job being done well. Why “bigger” is not better One of the most stubborn myths in HVAC is that more capacity means more comfort. Homeowners sometimes ask for the biggest system they can afford because they are tired of feeling hot and want to make sure the next system can keep up. The problem is that oversized equipment can create a new set of issues. ENERGY STAR warns that oversizing can shorten equipment life because of short cycling. Instead of delivering steady, controlled comfort, the system may satisfy the thermostat too quickly and shut off before the house is evenly conditioned. That can leave some rooms uncomfortable and put extra wear on components. A well-sized system is not weak. It is appropriate. It is selected for the home’s actual needs, not for fear or guesswork. That is why load calculations matter so much in replacement planning. Comfort comes from proper design and installation, not brute force. A word about ducts, because they are easy to forget Homeowners tend to think about HVAC as the equipment they can see, or at least point to. But the ducts have a huge effect on results. DOE specifically notes that leaky ducts can reduce efficiency and cause discomfort. ENERGY STAR recommends a well-sealed duct system as part of good HVAC performance. That means replacing equipment without evaluating the duct side of the system can leave a lot of value on the table. If you have rooms that are always off temperature, or if an older system never seemed to perform as expected, the ducts should be part of the replacement conversation. Sometimes the real upgrade is not only the equipment itself but the way conditioned air is delivered throughout the house. The best time to replace is usually before you desperately need to There is no perfect day to spend money on a new HVAC system. But there are definitely better and worse moments to make the decision. The worse moment is after a breakdown during a heat wave, when you are scrambling for emergency HVAC appointments and hoping someone can restore cooling before the house becomes miserable. The better moment is when the system is still operating, but the warning signs have become too consistent to ignore. If your equipment is more than 10 years old, repairs are becoming frequent, energy bills are rising, and comfort is slipping, that is usually not bad luck. It is your system telling you it is nearing the point where replacement deserves serious thought. And if you do replace it, do not think only about the piece of equipment being removed. Think about the home it serves. Ask whether a heat pump should be considered. Ask whether the sizing is based on actual calculations. Ask whether the ducts are in good enough shape to support the investment. Those questions are what separate a replacement that merely restores operation from one that actually improves daily life. A good HVAC system should not be something you negotiate with all summer. It should quietly do its job, through hot afternoons, through stretches of 90-degree days, through the weeks when demand is highest and you need it most. When your current system can no longer offer that kind of reliability, comfort, and reasonable efficiency, the timing is usually telling you something. It may be time to stop repairing around the edges and start fresh with a system that is properly chosen, properly installed, and ready for the seasons ahead. Green Planet Heating and Air provides professional HVAC repair, replacement, and air conditioning services in Burbank, CA. Our local team serves residential and commercial clients across Los Angeles County, including Glendale, Pasadena, and the San Fernando Valley, with high-efficiency heating and cooling solutions. We specialize in rapid AC repair, furnace maintenance, and indoor air quality upgrades to ensure your home remains comfortable and compliant with California Title 24 standards. As a trusted local contractor (License #894993), we prioritize technical precision and transparent pricing on every service call. If you are looking for an HVAC contractor or AC repair near me in Burbank or the surrounding communities, Green Planet Heating and Air is ready to assist. Green Planet Heating and Air Licensed HVAC Contractor Lic #894993 📍 2219 W. Olive Ave. Ste #227 Burbank, CA 91506, USA 📞 (818) 383-6516 ✉️ [email protected] Operating Hours Mon - Thu:8:00 AM - 7:00 PM Friday:8:00 AM - 5:00 PM Saturday:CLOSED Sunday:9:00 AM - 3:00 PM Facebook | Instagram View Map Visit Website

When an air conditioner quits in the middle of a hot spell, the problem feels bigger than a broken machine. The whole house changes character. Bedrooms hold heat longer into the evening, west-facing rooms become hard to use by late afternoon, and everyone starts drifting toward the least uncomfortable corner of the home. In San Marino, that kind of breakdown tends to happen when cooling systems are already under strain. Nearby Pasadena gives a useful picture of what summer demand looks like in this part of the San Gabriel Valley. Average highs there reach 89.1°F in July and 91.3°F in August, and those months bring a large number of 90-degree days. July averages 15.4 days at or above 90°F, and August averages 19.4. That helps explain why AC failures feel so urgent around here. When the weather runs hot for days at a time, a system that has been limping along can finally give out, and homeowners suddenly need real help, not vague advice. I have always found that the most useful guidance during an outage comes in two parts. First, how to get through the next several hours without making the house even hotter. Second, how to decide whether this is a repair moment or a replacement moment. Those are different decisions, and people often mix them together when the thermostat climbs and the house starts to feel stuffy. The first few hours matter more than most people think A failed AC unit does not just stop cooling. It also changes the heat balance of the house. Sun through windows, heat from cooking, warm attic conditions, and ordinary indoor activity start adding up fast. If you respond casually for half a day, indoor temperatures can drift much higher than they need to. The goal is not to make the home cold without air conditioning. That is unrealistic. The goal is to slow heat gain, avoid adding more heat indoors, and buy time while you figure out whether you need a repair visit or full emergency HVAC services. Here is the short version of what helps most in the first stretch after an AC failure: Close blinds or curtains in the sunniest rooms, especially in the afternoon. Avoid using the oven or any appliance that throws off noticeable heat. Keep exterior doors closed so hot outdoor air does not keep cycling inside. Move people into the coolest part of the house, which is often the shadiest room rather than the biggest one. Call for emergency HVAC help early if the forecast is still hot and the house is already warming up. Those steps sound simple because they are simple. They also work. People sometimes wait too long to call because they want to see whether the unit will “start air conditioning services acting right again.” That can be an expensive gamble during a hot week. If nearby conditions are already producing many 90-degree days, service calendars fill quickly. A homeowner who calls in the morning often has better options than one who waits until the house has been hot for six or eight hours. Why some breakdowns feel sudden, even when they are not Most cooling failures do not come completely out of nowhere. What usually happens is a long period of mediocre performance that goes unrecognized because the unit still runs. A system can keep turning on, making noise, and moving some air while doing a poor job of actually cooling the home. Then a hotter-than-usual afternoon exposes the weakness. That is one reason I tell homeowners to pay attention to comfort, not just operation. “The system runs” is not the same as “the system is healthy.” If one room stays warm every afternoon, or the house never quite catches up after sunset, that matters. If utility bills have been creeping upward while comfort slips, that matters too. ENERGY STAR lists frequent repairs, rising energy bills, rooms that are too hot or too cold, and equipment older than 10 years among the signs that it may be time to replace HVAC equipment. Those are not abstract warning signs. They are exactly the kind of clues people describe after a mid-season failure. There is also a practical issue with older systems. Once repair frequency starts to climb, each new service call becomes a decision point. One part gets replaced, then another weak spot shows up later. Some homeowners are comfortable taking that path for a while. Others get tired of losing time, sleep, and predictability every summer. Neither response is irrational. The right choice depends on the age of the equipment, the pattern of breakdowns, and how reliable cooling needs to be in that specific home. Repair or replace, the answer is rarely emotional for long In the first hour after an outage, replacement can sound dramatic. By the next day, it can sound sensible. The trick is to strip the decision down to the conditions that actually matter. If the system is relatively new, has not needed repeated repairs, and has otherwise cooled the house well, repair is often the obvious first step. If the equipment is older than 10 years, has needed several fixes, leaves some rooms too hot or too cold, and seems to drive higher energy bills, replacement deserves a serious look. That is not sales language. It is a practical reading of how cooling systems age and how operating problems tend to compound. A lot of homeowners focus only on the upfront number, which is understandable. But comfort systems affect the home every day in summer. A cheaper short-term repair can still be the wrong value if it leads to another failure during the next stretch of very hot weather. At the same time, replacement should not be rushed without a sizing discussion and installation plan. A new system is only as good as the way it is selected and installed. That point is worth stressing because it gets lost during an emergency. The pressure of a hot house can push people toward the fastest possible yes. Fast is not always wrong, but careless often is. The installation details homeowners rarely see, but definitely feel Two homes can install “high-efficiency” equipment and get very different results. The difference often comes down to design and workmanship rather than the label on the box. The Department of Energy and ENERGY STAR both make the same basic point in different ways. Oversized systems, improper charging, and leaky ducts can reduce efficiency, hurt comfort, and shorten equipment life. ENERGY STAR also notes that oversizing can cause short cycling, which can increase wear and lead to poorer performance over time. In plain language, bigger is not better if the system is wrong for the house. I have seen homeowners assume an oversized replacement will cool faster and solve every comfort complaint. What often happens instead is a system that cycles on and off too often, misses the mark on overall comfort, and puts unnecessary stress on itself. The house may feel cold in brief bursts without ever feeling evenly comfortable. That is especially frustrating after a major investment. Correct sizing matters. Matched equipment matters. A well-sealed duct system matters. ENERGY STAR recommends equipment that is correctly sized based on load calculations and paired with a well-sealed duct system. Those recommendations can sound technical, but the result is easy to understand. The system performs more like you expected it to. Proper installation can also affect operating costs in a meaningful way. ENERGY STAR says properly installed high-efficiency systems can save up to 20 percent on heating and cooling costs. That does not mean every home will hit the same number, and it should not be treated like a universal promise. But it does underline how much installation quality shapes long-term value. Heat pumps deserve a place in the conversation When people hear “replace the AC,” they often picture swapping one air conditioner for another. That is still one path, but it is not the only one. The Department of Energy says modern air-source heat pumps can cool homes efficiently in summer and are an energy-efficient alternative to traditional AC and furnaces. ENERGY STAR also notes that a central air conditioner can often be replaced with a heat pump for a modest additional cost, and that doing so can allow a homeowner to eliminate or downsize a furnace. That is a meaningful option because a breakdown can be the moment when a homeowner reassesses the whole heating and cooling setup, not just the failed cooling side. If the current system is aging, if the furnace is also older, or if the household wants a more efficient all-in-one approach, a heat pump may be worth discussing. This does not mean a heat pump is automatically the best answer for every home. It means homeowners should not assume they are locked into replacing like for like. During an emergency HVAC situation, people often become narrowly focused on restoring cooling as fast as possible. Speed matters, but so does the chance to make a better long-term choice if the existing system has been underperforming anyway. What a smart emergency call sounds like One thing that separates a productive service call from a frustrating one is the quality of information the homeowner can provide. You do not need to diagnose the system. You do need to describe what changed. A good description sounds like this: the unit was cooling weakly for a week, the bedrooms stayed warmer than usual, bills have been rising, and now the system runs without bringing the temperature down. Or this: the system is older, has needed multiple repairs, and this is the second summer it has struggled during hot weather. That kind of context helps frame the visit. It tells the technician whether this likely looks like a straightforward repair, a deeper system performance issue, or a home that should discuss replacement options instead of chasing another temporary fix. This is especially helpful when scheduling emergency HVAC services, where time is tight and prioritization matters. What does not help is calling with only, “It stopped working.” That is true, but not informative. The history often tells the real story. Some homes need more than a machine swap This is the part many homeowners do not hear until after they have already spent money once. If the old system struggled because it was the wrong size, poorly installed, or connected to a leaky duct system, replacing it with another system without addressing those issues can recreate the same comfort problems. You can end up with a brand-new unit and an old set of complaints. The back rooms still run warm. The bills still feel high. The equipment still cycles in a way that seems excessive. That is why the conversation around replacement should not begin and end with tonnage, brand, or headline efficiency. It should also include whether the system is matched correctly and whether the duct system is helping or hurting performance. The Department of Energy and ENERGY STAR both reinforce that those details are not optional. They are part of what makes a cooling system work well in real life. This is particularly relevant in a place where summer heat routinely drives heavy AC demand. A system that is merely adequate on a mild day may fail to deliver when the thermometer spends long stretches around or above 90. When replacement is the calmer choice Homeowners sometimes feel guilty replacing equipment that can technically still be repaired. I do not think that guilt is useful. A repairable system is not always a sensible system to keep. Replacement tends to become the calmer, more rational choice when several of the following conditions show up together: The equipment is more than 10 years old. Repairs have become frequent or repetitive. Energy bills keep rising without better comfort. Some rooms stay too hot or too cold. The house depends heavily on reliable cooling during long hot stretches. That is not a rigid formula. It is a pattern. One issue alone may not justify replacement. Three or four together usually mean the system is asking for a bigger conversation. The emotional difference is important too. A dependable system changes how people use their home. They sleep better, plan less around the weather, and stop wondering whether the next hot afternoon will trigger another breakdown. That peace of mind is hard to put on a spreadsheet, but it is real. How to stay practical when the house is getting hotter by the hour Emergency decisions go sideways when people try to settle every long-term question in a single overheated afternoon. A better approach is to divide the problem. First, stabilize the immediate situation. Keep solar heat down indoors, avoid generating extra heat, and line up emergency HVAC support before everyone else on the block realizes their system is struggling too. Second, once the immediate panic drops, ask the bigger questions. Has the current system been reliable? Is it older than 10 years? Have bills and comfort been moving in the wrong direction? Has the house already been warning you that something larger was off? Third, if replacement is on the table, do not let urgency erase basic standards. Sizing matters. Matched equipment matters. Duct condition matters. Installation quality matters. A rushed decision can lock in years of mediocre performance. That may sound less dramatic than “replace it now” or “just fix it,” but real HVAC judgment usually lives in the gray area. Good decisions come from understanding the pattern, not reacting only to the moment. The San Marino reality: cooling is not a luxury when the heat sets in In milder weather, people can sometimes limp through an equipment issue without much disruption. During a hot Southern California summer, that is a different story. With nearby Pasadena averaging highs near 90 and above in July and August, and with many days reaching at least 90°F, cooling systems in this area do serious work. Homes do not just prefer functioning AC during those periods. They rely on it. That is why a failed unit deserves prompt attention, especially if the weather pattern is not breaking anytime soon. It is also why homeowners should resist the temptation to treat every outage as a one-off event. Sometimes a failure is just a failure. Other times it is the final signal from a system that has been underperforming for a while. If your AC quits and the house starts warming fast, act early. Protect the indoor environment as best you can, call for emergency HVAC services before the schedule backs up, and use the interruption to assess whether repair still makes sense. If it does, great. If it does not, a properly sized, properly installed replacement, possibly including a heat pump, may leave you in a far better position for the next run of hot days. The main thing is not to confuse activity with progress. A quick repair on the wrong system is still the wrong system. A replacement done without attention to sizing or ducts can still disappoint. But a thoughtful response, even under pressure, can turn a miserable summer breakdown into the last one you have to nurse through. Green Planet Heating and Air provides professional HVAC repair, replacement, and air conditioning services in Burbank, CA. Our local team serves residential and commercial clients across Los Angeles County, including Glendale, Pasadena, and the San Fernando Valley, with high-efficiency heating and cooling solutions. We specialize in rapid AC repair, furnace maintenance, and indoor air quality upgrades to ensure your home remains comfortable and compliant with California Title 24 standards. As a trusted local contractor (License #894993), we prioritize technical precision and transparent pricing on every service call. If you are looking for an HVAC contractor or AC repair near me in Burbank or the surrounding communities, Green Planet Heating and Air is ready to assist. Green Planet Heating and Air Licensed HVAC Contractor Lic #894993 📍 2219 W. Olive Ave. Ste #227 Burbank, CA 91506, USA 📞 (818) 383-6516 ✉️ [email protected] Operating Hours Mon - Thu:8:00 AM - 7:00 PM Friday:8:00 AM - 5:00 PM Saturday:CLOSED Sunday:9:00 AM - 3:00 PM Facebook | Instagram View Map Visit Website